| Description |
LINX Pressure Control Kit gives you the hardware for inflation and deflation of either tires OR Air Suspension, not both. PLEASE NOTE: If you want to control pressure for tire filling AND Air Suspension, you need to purchase 2 x Pressure Control Kit.
| |
Amp Research PowerStep Override Switch (W/O Controller) allows manual control of your PowerStep running boards. Switch between Retract, Automatic, or Deploy modes. Easy dashboard installation, compatible with newer PowerStep controllers (STA, STB, XTA). Controller not included.
|
The TPMS LINX Bluetooth Module can easily be installed in any vehicle with a 12v power supply to wirelessly monitor a vehicle and up to 3 separate trailers on LINX utilizing already available ARB TPMS tire sensors.
| | New from TJM comes the intelligent DC/Solar battery charger (DC25A): the toughest and most advanced dual battery management system available on the market today. The TJM DC25A allows you to charge your 12V second/auxiliary deep cycle battery on the go. It is shock, vibration and dust proof, as well as water resistant, making it suitable for both in-vehicle and under-bonnet installation. Able to charge simultaneously from both solar and alternator (9–32V) inputs, DC25A can also function as an MPPT solar controller and features dual charging modes for compatibility with both smart and conventional alternators. Loaded with a host of safeguard features, the easy to install unit includes over/under voltage, anti-sparking, reverse connection and over temperature protection systems to ensure peace of mind. The TJM DC25A sets a new benchmark for DC-DC battery management.
FEATURES
The DC25A DC-DC charger is purposely designed for charging auxiliary batteries. It includes all the features needed to maintain the auxiliary battery to its optimum condition and to prolong the battery life.
SWITCHMODE TECHNOLOGY
The DC25A converts your vehicle’s 12VDC/24VDC alternator power to the correct voltage level allowing your batteries to be fully charged, prolonging battery life and reliability. With the latest synchronous switching technology, efficiency of DC25A exceeds 94% at typical full load condition.
DUAL INPUT OPERATION
Allows two energy sources to power the DC25A simultaneously. Solar input takes precedence if solar and alternator inputs are present. When solar input cannot provide enough energy to the load, the DC25A will draw power from solar and alternator simultaneously.
SOLAR MPPT
The DC25A utilises sophisticated MPPT (Maximum Power Point Tracking) solar regulator technology. MPPT maximises the power generated from the solar panels to the auxiliary battery.
SUPERIOR 3 STAGE CHARGING
Using high speed microcontroller and proprietary charging algorithm, the DC25A delivers a sophisticated 3 stage charging process resulting in a faster and more powerful charge, ideal for deep cycle batteries. The first stage, bulk (constant current), charges the battery faster while the second stage, absorption (constant voltage), ensures the battery is thoroughly charged. The final stage, float, maintains the battery at a safe voltage allowing it to be maintained and ready for use indefinitely.
MULTI-CHEMISTRY SUPPORT
The DC25A supports GEL, AGM, WET and CALCIUM batteries. If the calcium battery mode is selected, periodic equalisation will be provided to the calcium battery for removing acid stratification.
IGNITION CONNECTION
The DC25A can be wired to the vehicle’s ignition allowing it to operate only when the ignition is turned on. The ignition connection also activates the lower input voltage operation to suit vehicles with smart (variable voltage) alternators.
TEMPERATURE COMPENSATION
The DC25A is supplied with a 2 metre temperature sensor. The sensor monitors the battery temperature and adjusts (compensates) the charger’s output to prevent overcharging. This is ideal for batteries used in warmer climates or environments.
PROTECTIVE FEATURES
Spark-Free Protection
The DC25A will not start charging the battery (no output) unless the load is securely connected. It prevents the output leads from sparking due to accidental short circuit making the charger safer to use around batteries.
Reverse Connection Protection
Reverse connection on input and output terminals does not damage the DC25A internal circuit. The DC25A detects reverse connection condition and indicates whether input or output connection is reversed.
Over and Under Voltage Protection
The charger will automatically shut down if there is an over voltage or under voltage problem.
Over Temperature Protection
The charger will lower its output current if the temperature of the unit begins to overheat. |
| Content |
- Allows You To Take Full Advantage Of LINX Pressure Control Module
- Perfect For The Easy And Accurate Adjustment Of Tire Pressures
- Ability to Control A Set Of Airbags
- You Can Be In Control From Either Within Or Out Of The Vehicle At Up To 33 ft Away
| | PowerStep Override Switch allows you to TAKE CONTROL OF YOUR POWERSTEPâ„¢. Now you can manually control your AMP Research PowerStepâ„¢ with a temporary override switch. Whether deploying them to wash, or retracting them for off-roading, the switch gives you the flexibility you want in a PowerStepâ„¢. It allows you to manually raise or lower. Easily insert a toggle switch on the dash, and it is wired directly to PowerStep, PowerStep XL, PowewrStep Xtreme.
NOTE: Running Boards will return to Auto Operation in the next door cycle after 30 minutes.
- Manually control AMP Research PowerStep
- Weatherproof
- 5-year/60,000 mile warranty
- 79106-01A Override switch – Controller not included – Must be used with new type controller. Can be used for all Plug N Play steps.
| Features
- New Bluetooth Communication Module
- Easily Wires into the Vehicle's 12-Volt Electrical System
- Activate TPMS Vehicle and Trailer Modules in the LINX Main Menu
- Monitor Pressure, Temperature, and Battery on the LINX Display
- Define 1-4 Specific Modes with Custom Naming and Tire Pressure
- Learn, Swap or Delete Sensors During Wheel Swaps and Tire Changes
- Choose Single or Tandem Trailer Types
|
- Fog Light Kit
- 55 Watts
- Suitable for ARB Sahara Bumpers
- Use with existing fog light wiring or wiring harness #3500440
| |
| Additional information |
| Weight |
1 kg |
| Dimensions |
17 × 16 × 9 cm |
|
| Weight |
1 kg |
| Dimensions |
30 × 16 × 16 cm |
|
| Weight |
0.35 kg |
| Dimensions |
32 × 11 × 11 cm |
|
| Weight |
0.2 kg |
| Dimensions |
13 × 14 × 5 cm |
|
| Weight |
0.7 kg |
| Dimensions |
16 × 14 × 13 cm |
|
| Weight |
1.5 kg |
| Dimensions |
26 × 21 × 7 cm |
|
Reviews
There are no reviews yet.