GOOSE GEAR | SEAT DELETE PLATE SYSTEM 40% DRIVER SIDE | JL 4DR 2018+
240.000 KWD
Jeep Wrangler 2018-Present JLU Seat Delete Plate System for the Second Row is available to order for the 60% Passenger Seat and 40% Drivers Seat or can be combined to create a 100% second row delete.
Jeep Wrangler JLU Rear Plate System is required to install the Seat Delete Plate System.
The 60% Passenger Seat Delete Plate System is a bolt in replacement for the 60% rear seat delete. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points to attach it to the Jeep JLU RearPlate System, no drilling required. If you are installing just the 60% delete you will need to own or purchase a 60% Seat Delete Bracket. This kit DOES NOT include the Jeep JLU Plate System or the rear seat delete bracket.
Seat delete bracket can be found here
The 40% Driver Seat Delete Plate System is a bolt in replacement for the drivers side second row seat. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points without drilling and anchor points to attach it to the Jeep JLU Rear Plate System which is required to install the platform.
This Plate System is NOT compatible with the Jeep Wrangler 4xe.
The Goose Gear plate system and sleeping platform for the Jeep JLU are direct bolt in units and require no drilling into your vehicle for model years 2018+. Designed and built with industrial grade plywood and coating using our propriety spray methods for superior durability and wear resistance.
Also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc. If you have or plan to run an Ursa Minor J30 this also makes a great stepping platform.
Additional information
| Weight | 10 kg |
|---|---|
| Dimensions | 101 × 67 × 11 cm |
Be the first to review “GOOSE GEAR | SEAT DELETE PLATE SYSTEM 40% DRIVER SIDE | JL 4DR 2018+”
| Make | Model | Year |
|---|---|---|
| JEEP | JL | 2018 - 2022 |
Quick Comparison
| GOOSE GEAR | SEAT DELETE PLATE SYSTEM 40% DRIVER SIDE | JL 4DR 2018+ remove | ARB | Drawer Side Floor Left Only | LC200 | Suits RF1045 remove | BUILTRIGHT | SEAT BACK TECH PLATE MOLLE KIT DRIVER OR PASSENGER EA | F150/RAPTOR 2015-2020/F250 2017-2020 remove | BESTOP | SOFTOP AND ACCESSORIES CARE KIT SINGLE PACK remove | WEATHERTECH | THEFT DETERRENT STAINLESS HITCH PIN remove | WEATHERTECH | DESKFONE UNIVERSAL DESKTOP CELL PHONE HOLDER | BLACK remove | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  | ||||||||||||||||
| Rating | ||||||||||||||||||||||
| Price | 240.000 KWD | 65.000 KWD | Original price was: 89.000 KWD.71.200 KWDCurrent price is: 71.200 KWD. | Original price was: 19.000 KWD.15.200 KWDCurrent price is: 15.200 KWD. | 13.500 KWD | 11.750 KWD | ||||||||||||||||
| Add to cart | ||||||||||||||||||||||
| Description | Jeep Wrangler 2018-Present JLU Seat Delete Plate System for the Second Row is available to order for the 60% Passenger Seat and 40% Drivers Seat or can be combined to create a 100% second row delete. Jeep Wrangler JLU Rear Plate System is required to install the Seat Delete Plate System. The 60% Passenger Seat Delete Plate System is a bolt in replacement for the 60% rear seat delete. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points to attach it to the Jeep JLU RearPlate System, no drilling required. If you are installing just the 60% delete you will need to own or purchase a 60% Seat Delete Bracket. This kit DOES NOT include the Jeep JLU Plate System or the rear seat delete bracket. Seat delete bracket can be found here The 40% Driver Seat Delete Plate System is a bolt in replacement for the drivers side second row seat. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points without drilling and anchor points to attach it to the Jeep JLU Rear Plate System which is required to install the platform. This Plate System is NOT compatible with the Jeep Wrangler 4xe. The Goose Gear plate system and sleeping platform for the Jeep JLU are direct bolt in units and require no drilling into your vehicle for model years 2018+. Designed and built with industrial grade plywood and coating using our propriety spray methods for superior durability and wear resistance. Also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc. If you have or plan to run an Ursa Minor J30 this also makes a great stepping platform. | Deveoped to compliment your ARB Outback Drawers are the fully carpeted side panels. These panels accomodate any roller drawer floor combination and, as an added bennefit, increase storage next to your roller floor. The new carpet panel products consist of three sizes (945, 1045 and 1355) to suit all ARB Roller Floors, in either a left or right drawer configuration. The carpet panel kit provides a neat and clean solution to cover up the exposed metal sidewall of the drawer module while providing additional storage next to a roller floor. These kits include two carpeted panels that attach to the sidewall of the roller drawer and utilizes the full contents of a side floor kit (sold separately). Due to different sidewall heights of roller drawers and roller drawer with roller floors, we have included both panels for your convenience. Complementing the quality finish of ARB Outback Drawer modules, the adaptor panels are finished in the same high grade exterior carpet and have laser cut alignment holes to perfectly match the parts. Many of our customers place an ARB Fridge Freezer on the roller floor for convenient access to the fridges contents. One of the unique features of the adaptor panel is the provision of pre-cut holes that allow for the carpet to be trimmed to accommodate maximum air flow for your fridges condenser.
| Rigidly and securely mount a 16.0" x 23.5" BuiltRight Tech Plate to the driver or passenger seat back using this pair of patent pending upper and lower steel brackets as well as a pair of machined aluminum headrest loop brackets. Includes everything needed to outfit one seat. There are some fantastic light-duty options on the market from others - these are designed for folks that need a more robust solution.
This one's simple and you either need it or you don't. A lot of people use or are interested in using a seat-back MOLLE panel solution in their Ford truck and the reason we've avoided making a kit is that frankly, there are some pretty decent ones out there. The problem with them is that they attach to your seatback with nylon webbing. Great for manufacturers because a one-size-fits-all kit is ideal, but not great for users that need to know that their panel isn't going anywhere. Our rigidly mounted solution also ensures that your seats aren't damaged by straps, hardware or the panel itself.
| Universal BumpStep® Theft Detterent Stainless 5/8" Hitch Pin and Clip (8ASP1) by WeatherTech®. Ensure that your trailer or RV is securely fastened with this hitch pin from WeatherTech. Its theft deterrent design secures pin in receiver to prevent theft of your BumpStep®, Bike Carrier, etc. Made of machined stainless steel and featured with a stainless lock screw and clip, the hitch pin won't rust and serve you long. Designed for all 2-inch receivers.
FEATURES
| The DeskFone™ cell phone holder sits conveniently right on your desktop, so it’s perfect for at work or at home. 100% American-made from the finest materials, this desktop cell phone holder adjusts quickly and easily to fit a wide range of mobile phones, including those with normal-sized protective cases.
DeskFone’s™ unique tripod design ensures that there will be no wobbling, and your phone will remain completely stable. The anti-skid feet on the base ensure the holder will not shift or slide on just about any surface. The adjustable tilt allows you to keep your screen visible from almost any angle, so it’s perfect for video/conference calls or even just watching videos. It allows you to leave your phone plugged in while in the holder, and you can effortlessly remove your phone from the holder and replace it without ever disconnecting your charger. Perfect for multi-tasking, DeskFone™ makes your mobile device easy to use with one hand. It allows you to keep your mind on your work, while keeping your phone safe and accessible.
FEATURES
| |||||||||||||||||
| Content |
| |||||||||||||||||||||
| Weight | 10 kg | N/A | N/A | 1.75 kg | 0.25 kg | 0.5 kg | ||||||||||||||||
| Dimensions | 101 × 67 × 11 cm | N/A | N/A | 29 × 22 × 6 cm | 14 × 17 × 3 cm | 15 × 14 × 11 cm | ||||||||||||||||
| Additional information |
|
|
|
|
Reviews
There are no reviews yet.