“OME” Air Spring System (REAR) | Toyota Land Cruiser HZJ78/79

Compulsory complement for parabolic leaf springs.

The OME Airbag has been designed with a new internal stopper. While it replaces the OE bumper that is removed during installation, this internal bumper allows the airbag to be used without pressure so you can drive on it empty and it inflates only when you need it.

An airbag with even 4 psi in it and no additional charge added can alter the ride comfort of the vehicle and this is where the ARB airbag outperforms the rest.

Air Bag ventilation is achieved by a specifically designed purge control system that can be controlled manually with the valve cock or by the new ARB Air Bag Control System and the market leading LINX Air Bag Control Module.

Included in the airbag kit is:

1. 2x OME Airbags
2. Vehicle specific mounting brackets
3. 2x Air lines
4. 2x Inflation valves (Schrader type)
5. 2x Bleed valves
6. exhaust heat shield
7. air accessories
8. Ventilation filters
9. Complete assembly instructions

AIRBAG INFLATION

There are three ways to inflate and deflate the airbags in this kit:

• 1-. Manually through the Schrader inflation valves included with each Air Bag Kit

It can be inflated with any source of compressed air such as your ARB mountable or portable air compressor or using a gas station tire inflator. Use the manual bleed valve tap included in the kit to bleed or retain air

Electronically through the new ARB Air Suspension Control (ref. ARB-0830002)

• 2-. Inflation and deflation control in the palm of your hands via a smartphone app

It uses a pressure regulating valve, isolation valves and an ECU permanently connected to your mounted ARB air compressor, then controlled by the smartphone app.

Use the airbag purge control kit (ref. OMEAB-K001) to electronically control the purge function.

• 3-. Electronically via the market leading ARB LINX Vehicle Accessory Interface (ref. LX-100)

Complete inflation and deflation control from an in-vehicle A-pillar mounted vehicle accessory interface.

It uses a pressure regulating valve, isolation valves and the LINX ECU permanently connected to your mounted ARB air compressor for truly integrated control.

Use the airbag purge control kit (ref. OMEAB-K001) to also have electronic control of the purge function.