AMP Research | PowerStep Override Switch with STA Controller
65.000 KWD
Out Of stock
Notify me when back in stock
Now you can manually control your AMP Research POWERSTEP with a temporary over-ride switch. Whether deploying them to wash, or retracting them for off-roading, the switch gives you the flexibility you want in a POWERSTEP.
Description
- Allows Manual Override Of Deployment And Retracting
- Toggle Switch Easily Installs On Dash
- Wired Directly To PowerStep Controller
Compatibility:Â Designed for PowerStep systems equipped with STA, STB, or XTA dual-plug controllers. If your system uses an older single-plug controller (e.g., A-04, A-06, B-03, B-05), an upgrade to the corresponding STA or STB controller is necessary.
Additional information
| Weight | 1.5 kg |
|---|---|
| Dimensions | 25 × 25 × 10 cm |
Be the first to review “AMP Research | PowerStep Override Switch with STA Controller”
| Make | Model | Year |
|---|---|---|
| UNIVERSAL | ANY | 1990 - 2025 |
Quick Comparison
| AMP Research | PowerStep Override Switch with STA Controller remove | ARB | Auxiliary Light | Suits Base Rack remove | TJM | IBS JUMP START KIT remove | ARB | Intensity IQ Driving Lights | Pair remove | TJM | SOLAR BATTERY CHARGER | 25A remove | ARB | Pressure Control Kit | LINX remove | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  | ||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||
| Price | 65.000 KWD | 22.000 KWD | 28.000 KWD | 495.000 KWD | 110.000 KWD | 75.000 KWD | ||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||
| Description | Now you can manually control your AMP Research POWERSTEP with a temporary over-ride switch. Whether deploying them to wash, or retracting them for off-roading, the switch gives you the flexibility you want in a POWERSTEP. | The ARB Auxilliary Light includes a unique ARB BASE Rack bracket, over molded DT connector suitable for BASE Rack channelling, an additional DT connector for custom wiring, and a scene lighting beam to reduce hot spots in beam output and reduce glare for reverse cameras.The unique ARB BASE Rack bracket provides the ability for installation to any part of the BASE Rack's dovetail system. It can be wired to provide additional aux lighting around the vehicle for camping, working, or reverse lighting. Being compact at 2.8 x 2.21 inches, it allows for mounting in close-fitting areas and along the edge of the BASE Rack to minimize damage on tight roads and close parking. Its compact size further provides a sleek look and allows for a stealthy configuration. | TJM IBS jump start kit when added to the DBM system allows for fast charging through the relay during alternator charges. Remote emergency link start from auxiliary battery is also available. An optional 30 minute or 2 hour manual link can assist with winch operations. | ARB Intensity IQ driving lights have been developed with performance front of mind, while delivering a design that complements modern vehicle styling. Their unique four-optic design (Super Spot, Spot, Flood and Midrange) provides an unlimited choice of light beams to suit any road condition. The Super Spot and Spot optics, based on free-form reflector technology, produce an even spot beam for extended distance illumination. The Flood optic has a specially designed lens to maximize the light spread for excellent foreground visibility. The Midrange optics employ a conventional parabolic reflector to illuminate the midrange area. Furthermore, the beam pattern of each of the two lights can be independently adjusted so you could run, for example, one focused on spot and one focused on flood. An innovative, sleek, new mounting bracket design allows adjustment of light beam angle and provides additional mass and a surface for cooling. A pair of lights provides 1 Lux @ 4429 feet with the Max Spot setting, and the Max Flood setting provides 1 Lux @ 2953 feet with up to 164 foot spread on each side of the vehicle. The ARB Intensity IQ lights represent the perfect balance between visibility at distance and spread both down and across the road.
| New from TJM comes the intelligent DC/Solar battery charger (DC25A): the toughest and most advanced dual battery management system available on the market today. The TJM DC25A allows you to charge your 12V second/auxiliary deep cycle battery on the go. It is shock, vibration and dust proof, as well as water resistant, making it suitable for both in-vehicle and under-bonnet installation. Able to charge simultaneously from both solar and alternator (9–32V) inputs, DC25A can also function as an MPPT solar controller and features dual charging modes for compatibility with both smart and conventional alternators. Loaded with a host of safeguard features, the easy to install unit includes over/under voltage, anti-sparking, reverse connection and over temperature protection systems to ensure peace of mind. The TJM DC25A sets a new benchmark for DC-DC battery management. FEATURES The DC25A DC-DC charger is purposely designed for charging auxiliary batteries. It includes all the features needed to maintain the auxiliary battery to its optimum condition and to prolong the battery life. SWITCHMODE TECHNOLOGY The DC25A converts your vehicle’s 12VDC/24VDC alternator power to the correct voltage level allowing your batteries to be fully charged, prolonging battery life and reliability. With the latest synchronous switching technology, efficiency of DC25A exceeds 94% at typical full load condition. DUAL INPUT OPERATION Allows two energy sources to power the DC25A simultaneously. Solar input takes precedence if solar and alternator inputs are present. When solar input cannot provide enough energy to the load, the DC25A will draw power from solar and alternator simultaneously. SOLAR MPPT The DC25A utilises sophisticated MPPT (Maximum Power Point Tracking) solar regulator technology. MPPT maximises the power generated from the solar panels to the auxiliary battery. SUPERIOR 3 STAGE CHARGING Using high speed microcontroller and proprietary charging algorithm, the DC25A delivers a sophisticated 3 stage charging process resulting in a faster and more powerful charge, ideal for deep cycle batteries. The first stage, bulk (constant current), charges the battery faster while the second stage, absorption (constant voltage), ensures the battery is thoroughly charged. The final stage, float, maintains the battery at a safe voltage allowing it to be maintained and ready for use indefinitely. MULTI-CHEMISTRY SUPPORT The DC25A supports GEL, AGM, WET and CALCIUM batteries. If the calcium battery mode is selected, periodic equalisation will be provided to the calcium battery for removing acid stratification. IGNITION CONNECTION The DC25A can be wired to the vehicle’s ignition allowing it to operate only when the ignition is turned on. The ignition connection also activates the lower input voltage operation to suit vehicles with smart (variable voltage) alternators. TEMPERATURE COMPENSATION The DC25A is supplied with a 2 metre temperature sensor. The sensor monitors the battery temperature and adjusts (compensates) the charger’s output to prevent overcharging. This is ideal for batteries used in warmer climates or environments. PROTECTIVE FEATURES Spark-Free Protection The DC25A will not start charging the battery (no output) unless the load is securely connected. It prevents the output leads from sparking due to accidental short circuit making the charger safer to use around batteries. Reverse Connection Protection Reverse connection on input and output terminals does not damage the DC25A internal circuit. The DC25A detects reverse connection condition and indicates whether input or output connection is reversed. Over and Under Voltage Protection The charger will automatically shut down if there is an over voltage or under voltage problem. Over Temperature Protection The charger will lower its output current if the temperature of the unit begins to overheat. | LINX Pressure Control Kit gives you the hardware for inflation and deflation of either tires OR Air Suspension, not both. PLEASE NOTE: If you want to control pressure for tire filling AND Air Suspension, you need to purchase 2 x Pressure Control Kit.
| ||||||||||||||||||||
| Content |
| The two 10W OSRAM LEDs (20W total) provide intense lighting that spreads over a larger area than standard auxiliary lights, making the beam a true area light and minimizing hot spots from focused beams. Reduction of hot spots translates to clear images being sent through your reverse camera system when used at night or in dim environments as well as clear, not glaring lighting around the camp or worksite. Included with the ARB BASE Rack Auxiliary Light is 1 x 20W LED Light, 1 x Bracket to suit the ARB BASE Rack or Classic Racks, and both Male and Female DT connectors.
Features
|
|
| ||||||||||||||||||||||
| Weight | 1.5 kg | 0.5 kg | N/A | 13 kg | 1.5 kg | 1 kg | ||||||||||||||||||||
| Dimensions | 25 × 25 × 10 cm | 13 × 11 × 13 cm | N/A | 54 × 36 × 23 cm | 26 × 21 × 7 cm | 17 × 16 × 9 cm | ||||||||||||||||||||
| Additional information |
|
|
|
|
|
Reviews
There are no reviews yet.