| Description | When undertaking 4X4 remote area travel, the need to carry sufficient fuel, water, vehicle spares and safety equipment invariably means that your 4WD will be fully loaded, placing a lot of strain on suspension components. As part of their integrated 4WD suspension systems, Old Man Emu designs a range of coil springs for each vehicle, enabling the installer to match the most appropriate springs to the intended application. While ride height increases are attained, emphasis is placed on ride control improvements. Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system designed specifically to suit your vehicle. | The new BP-51 range of high performance, bypass shock absorbers is the result of an exhaustive development process aimed at delivering the ultimate in both comfort and control. Designed, developed and tested entirely in-house by ARB’s team of Old Man Emu ride engineers, BP-51 shock absorbers are vehicle-specific and utilize existing mounting locations to provide easy installation without the need for additional vehicle modification. Unlike most other adjustable shock absorbers, which provide adjustment for compression only, the BP-51 range allows on-vehicle, independent adjustability of both rebound and compression to offer class-leading ride customisation that can be tailored to an individual vehicle or trip requirements.
FEATURES
-
- Estimated Lift: 40-50mm
- REMOTE RESERVOIR - 6061-grade aluminium remote oil canister allows for increased oil volume, resulting in lower oil temperatures.
- HIGH-TEMPERATURE HOSE - Durable Dash 6 high-temperature Teflon hose incorporates high-flow fittings for optimum oil flow.
- TOP HAT - the 6061-grade aluminium top hat.
- SPRING ADJUSTMENT - 6061-grade aluminium adjustor allows adjustment of spring preload and ride height.
- X5K COIL - High-quality X5K grade steel coil, for use on coil-over models, incorporates application-specific design.
- SPRING SEAT - 6061-grade aluminium spring seat.
- SPHERICAL BEARINGS - Large, Teflon-lined spherical bearings.
- PIGGYBACK CLAMP - Remote reservoir piggy back clamp allows easy connection of the remote oil reservoir to the main shock absorber body.
- SHOCK ABSORBER BODY - 51mm bore, 6061-grade aluminium shock absorber body with type III, hard-anodized finish for increased heat dissipation and corrosion resistance.
- ADJUSTOR - External, independent rebound and compression adjustment allow fine-tuning of ride comfort and control to suit the varying vehicle and trip requirements.
- PISTON SHAFT - Hard chromed, ground piston shaft for the ultimate in strength and durability.
- SHAFT GUARD - Replaceable, impact-resistant, high-density polyethene shaft guard prevents damage to the shock absorber shaft from stones and other debris.
- BUSHINGS - Quality oversized rubber bushings result in excellent longevity.
|
GM SUV/SUT 1.5" Rear Coil Spring Spacer Kit 1999-2020 GM/ CHEVY 1500 TAHOE/SUBURBAN/ YUKON/YUKON XL/ H2 2WD/4WD BILLET ALUMINUM CONSTRUCTION Note: Not compatible with AutoRide, Air Leveling, and/or MagnaRide Suspension
| The new BP-51 range of high performance, bypass shock absorbers is the result of an exhaustive development process aimed at delivering the ultimate in both comfort and control. Designed, developed and tested entirely in-house by ARB’s team of Old Man Emu ride engineers, BP-51 shock absorbers are vehicle-specific and utilize existing mounting locations to provide easy installation without the need for additional vehicle modification. Unlike most other adjustable shock absorbers, which provide adjustment for compression only, the BP-51 range allows on-vehicle, independent adjustability of both rebound and compression to offer class-leading ride customisation that can be tailored to an individual vehicle or trip requirements.
FEATURES
-
- Estimated Lift: 40-50mm
- REMOTE RESERVOIR - 6061 grade aluminum remote oil canister allows for increased oil volume, resulting in lower oil temperatures.
- HIGH TEMPERATURE HOSE - Durable Dash 6 high-temperature Teflon hose incorporates high-flow fittings for optimum oil flow.
- TOP HAT - 6061 grade aluminum top hat.
- SPRING ADJUSTMENT - 6061 grade aluminum adjustor allows adjustment of spring preload and ride height.
- X5K COIL - High-quality X5K grade steel coil, for use on coil over models, incorporates application-specific design.
- SPRING SEAT - 6061 grade aluminum spring seat.
- SPHERICAL BEARINGS - Large, Teflon-lined spherical bearings.
- PIGGY BACK CLAMP - Remote reservoir piggy back clamp allows easy connection of the remote oil reservoir to the main shock absorber body.
- SHOCK ABSORBER BODY - 51mm bore, 6061 grade aluminum shock absorber body with type III, hard anodized finish for increased heat dissipation and corrosion resistance.
- ADJUSTOR - External, independent rebound and compression adjustment allows fine tuning of ride comfort and control to suit varying vehicle and trip requirements.
- PISTON SHAFT - Hard chromed, ground piston shaft for the ultimate in strength and durability.
- SHAFT GUARD - Replaceable, impact resistant, high-density polyethylene shaft guard prevents damage to the shock absorber shaft from stones and other debris.
- BUSHINGS - Quality oversized rubber bushings result in excellent longevity.
| Performance Series Coil-Over IFP Shock
Performance Series Coil-over IFP shock is loaded with advanced technology and a long list of features that set it apart. The precision, metal impact extruded aluminum body increases cooling capacity and is rust resistant. The vehicle-specific upper mount includes a composite bushing that isolates noise and vibration.
Locking, spring preload rings that allow easy ride height and preload adjustment retain a top quality racing coil, selected to deliver the optimal spring rate. Performance Series Coil-Over IFP shocks bolt on with no modifications and are designed to level your truck front-to-rear. Applications are available for stock and lifted trucks that re-use the stock shock.
Inside is an internal reservoir with Internal Floating Piston (IFP) mono-tube design separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving. The easy-to-install, Performance Series 2.0 Coil-over IFP provides a comfortable on-road ride and predictable off-road handling in even the toughest conditions. |
- Designed to maintain factory alignment specs on vehicles with 1.5"-3" lift kits.
- 4130 chromoly tubular upper control arms are 100% bolt on and hand crafted in the U.S.A.
- 1" I.D. uniballs feature a heat-treated stainless-steel ball & heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.
- CNC tapered spindle adapters convert the factory ball joint to a 1" uniball for easy installation.
- Custom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.
- Urethane bushings reduce deflection compared to stock rubber bushings.
- Control arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.
- 3 stage powder coat process includes a durable clear coat to provide a long-lasting finish.
- Complete grade 8 hardware kit is included.
|
| Content |
- Double scragged to reduce spring stress and enhance spring life
- Constant variable rate coils available for multiple applications
- Formed on computer-precision mandrels to ensure consistency
- Designed to exact specifications guaranteeing vehicle fitment
- Finished in durable hard wearing black powder coat
| | | | | |
Reviews
There are no reviews yet.