| Description |
The Rhino-Rack Spade is a compact tool of 1065mm / 42" in length that allows quick storage and perfect for getting under bogged vehicles. Constructed of heavy duty heat treated Hi-Carbon Steel, zinc plated and powder-coated resulting with maximum strength and rust protection. Detailed with a slip resistant grip and dual core construction providing greater strength and control for all weather conditions. The Rhino-Rack Spade is designed for comfort, ease of use and convenience. As a versatile and compact tool, it is used by the All 4 Adventure Team as a go to spade on the move.
| The Tie Down Strap with Hook is designed to be used with Rhino-Rack Eye Bolt Kits to strap down accessories. The hooks can be used to secure loads to fixtures up to 25mm in diameter or mesh wire. The strap itself is 3m / 118 inches in length. | Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle. Installation is a breeze - simply place the spacers between the leg unit and the crossbar of your roof rack until all of the crossbars have been raised to an even level.
| Thanks to Rhino-Rack&39;s Awning Extension, owners of the Sunseeker 2.5 and Batwing awning range are able to extend the coverage of their shade out by a further 2m. Simply zip the Awning Extension to the awning and secure it to the ground or use the provided telescopic poles and pegs to open it out, creating more shade.
|
The flat bracket to suit Maxtrax and Tred recovery tracks fits onto the Pioneer with a resultant set of 4 location bolts/pins protruding upright and tightened via the set of knobs securing the recovery tracks in a set and firm position. The Pioneer Recovery Tracks Flat Bracket is easily installed and made from corrosion resistant black powder coated steel. Installation on the Pioneer roof rack keeps the dirt and mud outside your vehicle after use. Suitable for all models of Pioneer, up to 4 x Maxtrax or 2 x Tred can be stacked, utilizing this bracket.
| This bracket allows you to mount the Quick Pitch Weather shade 20 sec awning to a Rhino Rack roof rack, the bracket was designed to fit the older version and newer version of the Rhino Rack. The bracket comes Left-Hand Side. |
| Content |
- 1065mm length for increased maneuverability under vehicles
- Compact size also aids in storage
- Blade constructed of Heavy duty heat treated Hi-carbon Steel
- Zinc plated and powder-coated for maximum strength and rust protection
- Non-slip rubber grip handle provides comfort
- Dual core construction provides added strength
- Used by the All 4 Adventure Team
| |
- Each spacer is 10mm high, and this pack comes with 2 x spacers and 2 x M10 (35mm) bolts.
- Designed specifically to fit Rhino-Rack Heavy Duty bars.
- Provides one bar with a 10mm increase in height.
- compatibility: LC71/76/79 4DR & 2DR | Y61 4DR
|
- Everything you need is included: telescopic poles, ropes, pegs and a travel bag for your added convenience.
- The Awning Extension is made from the same top notch rip-stop polycotton canvas that is used for all our awning products.
- This extension is not only UV-protected but also waterproof, mould resistant and rust proof.
- All telescopic poles, ropes and pegs are included along with a storage bag.
- Quick & Easy to attach
- UV Protected
- Waterproof (Rating:1500mm)
- MouldShield
- Rust Proof
- Suitable with the Sunseeker and Batwing Awnings
- Additional 4m2 (43ft2) of coverage
- Fits Awning Type: Sunseeker 2.5m (32133)
- Dimensions: Width - 2500 mm / Length - 2000 mm
|
- Secures Recovery Tracks to your Rhino-Rack Pioneer System.
- Keeps your vehicle free from bogs.
- Keeps your vehicle&39;s interior clean.
- Easy to install.
- Made from corrosion resistant black powder coated steel.
- Not compatible with Pioneer Series 6 platforms.
| This bracket allows you to easily mount the Quick Pitch Weather Shade 20 Sec Awning to a Rhino Rack roof rack. It is designed to fit both the older and newer versions of the Rhino Rack and comes in a Left-Hand Side configuration for easy installation and secure attachment. |
| Additional information |
| الوزن |
0.37 كيلوجرام |
| الأبعاد |
110 × 25 × 7 سنتيميتر |
|
| الوزن |
0.8 كيلوجرام |
| الأبعاد |
35 × 16 × 8 سنتيميتر |
|
| الوزن |
0.25 كيلوجرام |
| الأبعاد |
15 × 16 × 4 سنتيميتر |
|
| الوزن |
12.9 كيلوجرام |
| الأبعاد |
126 × 11 × 11 سنتيميتر |
|
| الوزن |
2 كيلوجرام |
| الأبعاد |
35 × 13 × 6 سنتيميتر |
|
| الوزن |
4.5 كيلوجرام |
| الأبعاد |
31 × 31 × 23 سنتيميتر |
|
المراجعات
لا توجد مراجعات بعد.