Description | Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle. Installation is a breeze - simply place the spacers between the leg unit and the crossbar of your roof rack until all of the crossbars have been raised to an even level.
| The tent itself is manufactured with the best quality canvas, comes with a standard flysheet and load rails on top. Inside there is a tri-colour LED light that can be attached onto three different places, an anti-slip telescopic ladder, two removable inner bags, 50mm high dense mattress, two zipped shoe bags on the outsides and you can keep your bedding inside while closed or in traveling position. The lightweight AERO Roof Top Tent is manufactured in South Africa by South African bush lovers and weighs in at a mere 60kg.
| The Quick Pitch Load Bar is ideal for anyone to mount any accessory to the load bar. You can mount roof top tents, working lights, brackets, jerry cans or any other object to any side of the load bar. |
The flat bracket to suit Maxtrax and Tred recovery tracks fits onto the Pioneer with a resultant set of 4 location bolts/pins protruding upright and tightened via the set of knobs securing the recovery tracks in a set and firm position. The Pioneer Recovery Tracks Flat Bracket is easily installed and made from corrosion resistant black powder coated steel. Installation on the Pioneer roof rack keeps the dirt and mud outside your vehicle after use. Suitable for all models of Pioneer, up to 4 x Maxtrax or 2 x Tred can be stacked, utilizing this bracket.
| Thanks to Rhino-Rack&39;s Awning Extension, owners of the Sunseeker 2.5 and Batwing awning range are able to extend the coverage of their shade out by a further 2m. Simply zip the Awning Extension to the awning and secure it to the ground or use the provided telescopic poles and pegs to open it out, creating more shade.
| Easy to use bracket that mounts to the existing side rail of your Quick Pitch RTT, allowing you to mount the Quick En Suite to your Quick Pitch RTT. |
Content |
- Each spacer is 10mm high, and this pack comes with 2 x spacers and 2 x M10 (35mm) bolts.
- Designed specifically to fit Rhino-Rack Heavy Duty bars.
- Provides one bar with a 10mm increase in height.
- compatibility: LC71/76/79 4DR & 2DR | Y61 4DR
| The USB-C rechargeable LED light can be placed on one of the three positions in the tent, or anywhere else using the magnetic strip on the back. Switch between white, orange and red, with the red light being especially useful in areas with a lot of mosquitoes as it does not attract them - Although as standard the tent already has mosquito nets at all entrances.
The 50 mm mattress of the lightweight roof tent consists of high-density cold foam. The roof tent construction also features high-density insulation, providing a cozy and well-insulated sleeping environment.
Special Features
| It comes manufactured from the best quality extruded aluminum and then powder-coated black for a great finish.
Features
- 2 x 1450mm Load Bars
- Quick Pitch end caps to give the load bar a great finish.
|
- Secures Recovery Tracks to your Rhino-Rack Pioneer System.
- Keeps your vehicle free from bogs.
- Keeps your vehicle&39;s interior clean.
- Easy to install.
- Made from corrosion resistant black powder coated steel.
- Not compatible with Pioneer Series 6 platforms.
|
- Everything you need is included: telescopic poles, ropes, pegs and a travel bag for your added convenience.
- The Awning Extension is made from the same top notch rip-stop polycotton canvas that is used for all our awning products.
- This extension is not only UV-protected but also waterproof, mould resistant and rust proof.
- All telescopic poles, ropes and pegs are included along with a storage bag.
- Quick & Easy to attach
- UV Protected
- Waterproof (Rating:1500mm)
- MouldShield
- Rust Proof
- Suitable with the Sunseeker and Batwing Awnings
- Additional 4m2 (43ft2) of coverage
- Fits Awning Type: Sunseeker 2.5m (32133)
- Dimensions: Width - 2500 mm / Length - 2000 mm
| The Quick Pitch Bracket is an easy-to-use mount that attaches directly to the existing side rail of your Quick Pitch RTT, allowing you to securely attach the Quick En Suite. It offers a simple and efficient way to enhance your setup without complicated installation. |
Additional information |
الوزن |
0.25 كيلوجرام |
الأبعاد |
15 × 16 × 4 سنتيميتر |
|
الوزن |
67 كيلوجرام |
الأبعاد |
226 × 135 × 29 سنتيميتر |
|
الوزن |
8.5 كيلوجرام |
الأبعاد |
165 × 11 × 11 سنتيميتر |
|
الوزن |
2 كيلوجرام |
الأبعاد |
35 × 13 × 6 سنتيميتر |
|
الوزن |
12.9 كيلوجرام |
الأبعاد |
126 × 11 × 11 سنتيميتر |
|
الوزن |
0.5 كيلوجرام |
الأبعاد |
16 × 11 × 11 سنتيميتر |
|
المراجعات
لا توجد مراجعات بعد.