BIOLITE | BASECHARGE 12V CAR CHARGING CABLE 10FT
8.500 KWD
Out Of stock
Notify me when back in stock
This adapter cable enables BioLite BaseCharge power stations to recharge from your 12V car port, commonly where lighters used to be located. Ideal for charging on-the-go and when you need an alternative or backup to solar.
- Gauge: 18 AWG (15A fuse)
- (1) High Power Pole (HPP) Ouput
- [1] 12V Male Car Port Input
- Length: 10 ft (3 m)
Tech Specs
CONNECTOR TYPE
(1) High Power Pole (HPP), Output
1x 12V Male Carport, Input
GAUGE
18 AWG (15A fuse)
LENGTH
10 ft in (3 m)
معلومات إضافية
| الوزن | 0.2 كيلوجرام |
|---|---|
| الأبعاد | 18 × 8 × 4 سنتيميتر |
كن أول من يقيم “BIOLITE | BASECHARGE 12V CAR CHARGING CABLE 10FT”
Quick Comparison
| BIOLITE | BASECHARGE 12V CAR CHARGING CABLE 10FT remove | TJM | SOLAR BATTERY CHARGER | 25A remove | ARB | FRIDGE SLIDE CLASSIC II | 35L/47L remove | BIOLITE | HEADLAMP 800 | MIDNIGHT GRAY BLACK remove | TJM | IBS JUMP START KIT remove | ARB | LED Bumpers Fog Light Kit remove | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  | ||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||
| Price | 8.500 KWD | 110.000 KWD | 105.000 KWD | 34.000 KWD | 28.000 KWD | 45.000 KWD | ||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||
| Description | This adapter cable enables BioLite BaseCharge power stations to recharge from your 12V car port, commonly where lighters used to be located. Ideal for charging on-the-go and when you need an alternative or backup to solar.
Tech SpecsCONNECTOR TYPE
(1) High Power Pole (HPP), Output
1x 12V Male Carport, Input
GAUGE
18 AWG (15A fuse)
LENGTH
10 ft in (3 m) | New from TJM comes the intelligent DC/Solar battery charger (DC25A): the toughest and most advanced dual battery management system available on the market today. The TJM DC25A allows you to charge your 12V second/auxiliary deep cycle battery on the go. It is shock, vibration and dust proof, as well as water resistant, making it suitable for both in-vehicle and under-bonnet installation. Able to charge simultaneously from both solar and alternator (9–32V) inputs, DC25A can also function as an MPPT solar controller and features dual charging modes for compatibility with both smart and conventional alternators. Loaded with a host of safeguard features, the easy to install unit includes over/under voltage, anti-sparking, reverse connection and over temperature protection systems to ensure peace of mind. The TJM DC25A sets a new benchmark for DC-DC battery management. FEATURES The DC25A DC-DC charger is purposely designed for charging auxiliary batteries. It includes all the features needed to maintain the auxiliary battery to its optimum condition and to prolong the battery life. SWITCHMODE TECHNOLOGY The DC25A converts your vehicle’s 12VDC/24VDC alternator power to the correct voltage level allowing your batteries to be fully charged, prolonging battery life and reliability. With the latest synchronous switching technology, efficiency of DC25A exceeds 94% at typical full load condition. DUAL INPUT OPERATION Allows two energy sources to power the DC25A simultaneously. Solar input takes precedence if solar and alternator inputs are present. When solar input cannot provide enough energy to the load, the DC25A will draw power from solar and alternator simultaneously. SOLAR MPPT The DC25A utilises sophisticated MPPT (Maximum Power Point Tracking) solar regulator technology. MPPT maximises the power generated from the solar panels to the auxiliary battery. SUPERIOR 3 STAGE CHARGING Using high speed microcontroller and proprietary charging algorithm, the DC25A delivers a sophisticated 3 stage charging process resulting in a faster and more powerful charge, ideal for deep cycle batteries. The first stage, bulk (constant current), charges the battery faster while the second stage, absorption (constant voltage), ensures the battery is thoroughly charged. The final stage, float, maintains the battery at a safe voltage allowing it to be maintained and ready for use indefinitely. MULTI-CHEMISTRY SUPPORT The DC25A supports GEL, AGM, WET and CALCIUM batteries. If the calcium battery mode is selected, periodic equalisation will be provided to the calcium battery for removing acid stratification. IGNITION CONNECTION The DC25A can be wired to the vehicle’s ignition allowing it to operate only when the ignition is turned on. The ignition connection also activates the lower input voltage operation to suit vehicles with smart (variable voltage) alternators. TEMPERATURE COMPENSATION The DC25A is supplied with a 2 metre temperature sensor. The sensor monitors the battery temperature and adjusts (compensates) the charger’s output to prevent overcharging. This is ideal for batteries used in warmer climates or environments. PROTECTIVE FEATURES Spark-Free Protection The DC25A will not start charging the battery (no output) unless the load is securely connected. It prevents the output leads from sparking due to accidental short circuit making the charger safer to use around batteries. Reverse Connection Protection Reverse connection on input and output terminals does not damage the DC25A internal circuit. The DC25A detects reverse connection condition and indicates whether input or output connection is reversed. Over and Under Voltage Protection The charger will automatically shut down if there is an over voltage or under voltage problem. Over Temperature Protection The charger will lower its output current if the temperature of the unit begins to overheat. |
 10900021 ARB FRIDGE FREEZER SLIDE FOR 35L & 47LThis slide enables any user to slide out the Fridge Freezer to have more comfortable position to gain easy access to cold food and drinks, organize your content and clean the fridge. Product Features· Manufactured from heavy duty 2.5mm thick hot rolled steel sheet that is precision laser cut, formed for strength and rigidity · Zinc plated and finished in black E-coat for maximum durability and corrosion resistance · Rated to carry 80 kg, the ARB Fridge slide can also have a multitude of other uses such as being able to carry tools of trade like compressors or toolboxes · Flat mounting base for secure fitment and multi position EZ latch mechanism which can be fitted on either the left or right-hand side, depending on user preference Product Features· ‘Comfort’ plastic coated handle on the EZ latch mechanism · Simple solution to gain easy access to cold food and drinks from your ARB Fridge · Permanent mounting possible utilizing included holes in the base · Perfect for cleaning out your fridge and laser cut hole in slide mounting plate allows easy draining of fluid without needing to remove your fridge from the vehicle · Sealed roller bearings prevent dust ingress and incorporate a lock-in lock-out mechanism to ensure the slide stays in position no matter what angle your vehicle is on |
| TJM IBS jump start kit when added to the DBM system allows for fast charging through the relay during alternator charges. Remote emergency link start from auxiliary battery is also available. An optional 30 minute or 2 hour manual link can assist with winch operations. | Optional fog light installation kit for vehicles with OE Factory Fog Lights. Different part numbers required to install the optional foglight kit for vehicles that did not come with OE Fog Lamps. See vehicle application guide for details.
| ||||||||||||||||||||
| Content |
| |||||||||||||||||||||||||
| Weight | 0.2 كيلوجرام | 1.5 كيلوجرام | 13 كيلوجرام | 0.3 كيلوجرام | غير محدد | 2 كيلوجرام | ||||||||||||||||||||
| Dimensions | 18 × 8 × 4 سنتيميتر | 26 × 21 × 7 سنتيميتر | 77 × 47 × 10 سنتيميتر | 15 × 6 × 6 سنتيميتر | غير محدد | 25 × 16 × 14 سنتيميتر | ||||||||||||||||||||
| Additional information |
|
|
|
|
|
المراجعات
لا توجد مراجعات بعد.