| Description | With conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the shaft occupies more volume in the body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state. To overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.
The Factory Race Series 2.0 Stabilizer ATS utilizes an Adjustable Through Shaft (ATS) architecture that eliminates shaft fluid displacement throughout the stabilizer’s entire travel in both directions. The external piggyback reservoir provides additional fluid capacity and utilizes an Internal Floating Piston (IFP) to separate the fluid from the nitrogen gas charge to eliminate cavitation. For increased control that can be tailored to any driving style and setup, an external adjuster provides 24 clicks of adjustment to fine tune the feel. The result is highly customizable and consistent damping of unwanted steering feedback in a single, bolt-on stabilizer.
| Body |
2.0” impact extruded and CNC machined 6061-T6 clear anodized aluminum body resists rust over time |
| Body Plating |
Hard-anodized for a durable finish |
| Reservoir |
External reservoir design separates shock oil from the high-pressure nitrogen |
| Components |
Black-anodized, CNC-machined 6061-T6 billet aluminum |
| Shaft |
5/8" hard chrome plated heat-treated alloy steel |
| Piston |
Race-developed high-flow piston design |
| Valving |
Application specific valving to maximize performance |
| Seals |
Redundant sealing pack system main seal, wiper seal, scraper seal |
| Bushings |
Quiet nitrile rubber allows for increased suspension articulation |
| Adjustments |
Adjuster - 24 clicks of adjustability |
| Extended |
23.190 |
| Compressed |
15.070 |
| Travel |
8.120 |
| Top Mount |
Axle Mount |
| Bottom Mount |
Eyelet |
| Fitment notes |
Axle Mount |
| The Nitrocharger Sport range utilizes significant advances in key componentry and the latest in valving technology to provide tremendous improvements in ride, comfort and handling over all terrains.
Vehicle specific valving ensures the proper valving is matched to your spring selection, accessory fitment and load carrying requirements, meaning there’s a Nitrocharger Sport Shock Absorber to suit your needs, no matter what the terrain or intended vehicle use.
Nitrocharger Sport Shock Absorbers offer the most cohesive, balanced and finely tuned valving system on the market.
FEATURES
-
- Estimated Lift: 40-50mm
- MULTI-DISC COMPRESSION VALVING - Six valving discs allow greater valving options for the maximum ride and handling performance.
- HEAVY GAUGE RESERVE TUBE - Heavy gauge (1.6mm) steel reserve tube is 23% more effective than common 1.3mm wall tubing to protect internal components from stone damage.
- HIGH-QUALITY OIL - Petroleum-based, high-performance formula designed to resist fade and aeration for improved durability and shock absorber performance.
- DUAL-STACK DEFLECTIVE DISC TECHNOLOGY - Durable rebound and compression multi-deflective disc stacking on either side of the free-flowing piston allows infinite tuning options.
- NITROGEN GAS Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance.
- MULTI-DISC COMPRESSION VALVING - Six valving discs allow greater valving options for the maximum ride and handling performance.
- ROD GUIDE - Large, low friction Teflon impregnated bronze bushing for long-lasting durability.
- TRIPLE LIP OIL SEAL - Large, durable seal incorporates a gas retention check valve design to virtually eliminate contaminant damage while providing outstanding gas and oil retention.
- PISTON ROD - Super strong 18mm induction hardened chrome piston rod is engineered to handle rigours of heavy loads and tough 4x4 touring.
- DIRT SHIELD - Impact resistant, polyamide dirt shield provides additional protection from stone chips and off-road debris.
- VEHICLE SPECIFIC BUSHINGS - High-quality, vehicle-specific bushing manufactured from polyurethane and rubber materials for extended life.
| 2007-2018 GM 1500, SHACKLE
This shackle has an eye-to-eye length that is 2 inches longer than stock, allowing for much more droop capabilities. Recommended for use with Deaver leaf spring package. |
- 100% bolt on.
- Upper and lower links are constructed from 1 1/2" .188 wall 4130 chromoly tubing for maximum strength and feature massive 1.250” chromoly heim joints.
- Panhard bar is constructed from 1 1/4” .250 wall 4130 chromoly tubing for maximum strength and uses 7/8” chromoly heims.
- Upper, lower and pan hard bars are designed to incorporate a heim joint making the entire rear link system length adjustable
- Includes greasable urethane pivot bushings.
- Capable of more wheel travel with custom shocks and mounts.
- Hi-misalignment spacers included, re-uses factory mounting hardware.
| The new BP-51 range of high performance, bypass shock absorbers is the result of an exhaustive development process aimed at delivering the ultimate in both comfort and control. Designed, developed and tested entirely in-house by ARB’s team of Old Man Emu ride engineers, BP-51 shock absorbers are vehicle-specific and utilize existing mounting locations to provide easy installation without the need for additional vehicle modification. Unlike most other adjustable shock absorbers, which provide adjustment for compression only, the BP-51 range allows on-vehicle, independent adjustability of both rebound and compression to offer class-leading ride customisation that can be tailored to an individual vehicle or trip requirements.
FEATURES
-
- FRONT Estimated Lift: 40-50mm
- REMOTE RESERVOIR - 6061 grade aluminum remote oil canister allows for increased oil volume, resulting in lower oil temperatures.
- HIGH TEMPERATURE HOSE - Durable Dash 6 high-temperature Teflon hose incorporates high-flow fittings for optimum oil flow.
- TOP HAT - 6061 grade aluminum top hat.
- SPRING ADJUSTMENT - 6061 grade aluminum adjustor allows adjustment of spring preload and ride height.
- X5K COIL - High-quality X5K grade steel coil, for use on coil over models, incorporates application-specific design.
- SPRING SEAT - 6061 grade aluminum spring seat.
- SPHERICAL BEARINGS - Large, Teflon-lined spherical bearings.
- PIGGY BACK CLAMP - Remote reservoir piggy back clamp allows easy connection of the remote oil reservoir to the main shock absorber body.
- SHOCK ABSORBER BODY - 51mm bore, 6061 grade aluminum shock absorber body with type III, hard anodized finish for increased heat dissipation and corrosion resistance.
- ADJUSTOR - External, independent rebound and compression adjustment allows fine tuning of ride comfort and control to suit varying vehicle and trip requirements.
- PISTON SHAFT - Hard chromed, ground piston shaft for the ultimate in strength and durability.
- SHAFT GUARD - Replaceable, impact resistant, high-density polyethylene shaft guard prevents damage to the shock absorber shaft from stones and other debris.
- BUSHINGS - Quality oversized rubber bushings result in excellent longevity.
| The new BP-51 range of high performance, bypass shock absorbers is the result of an exhaustive development process aimed at delivering the ultimate in both comfort and control. Designed, developed and tested entirely in-house by ARB’s team of Old Man Emu ride engineers, BP-51 shock absorbers are vehicle-specific and utilize existing mounting locations to provide easy installation without the need for additional vehicle modification. Unlike most other adjustable shock absorbers, which provide adjustment for compression only, the BP-51 range allows on-vehicle, independent adjustability of both rebound and compression to offer class-leading ride customisation that can be tailored to an individual vehicle or trip requirements.
FEATURES
-
- Estimated Lift: 40-50mm
- REMOTE RESERVOIR - 6061-grade aluminium remote oil canister allows for increased oil volume, resulting in lower oil temperatures.
- HIGH-TEMPERATURE HOSE - Durable Dash 6 high-temperature Teflon hose incorporates high-flow fittings for optimum oil flow.
- TOP HAT - 6061-grade aluminium top hat.
- SPRING ADJUSTMENT - 6061 grade aluminum adjustor allows adjustment of spring preload and ride height.
- X5K COIL - High-quality X5K grade steel coil, for use on coil over models, incorporates application-specific design.
- SPRING SEAT - 6061 grade aluminum spring seat.
- SPHERICAL BEARINGS - Large, Teflon-lined spherical bearings.
- PIGGY BACK CLAMP - Remote reservoir piggy back clamp allows easy connection of the remote oil reservoir to the main shock absorber body.
- SHOCK ABSORBER BODY - 51mm bore, 6061 grade aluminum shock absorber body with type III, hard anodized finish for increased heat dissipation and corrosion resistance.
- ADJUSTOR - External, independent rebound and compression adjustment allows fine tuning of ride comfort and control to suit varying vehicle and trip requirements.
- PISTON SHAFT - Hard chromed, ground piston shaft for the ultimate in strength and durability.
- SHAFT GUARD - Replaceable, impact resistant, high-density polyethylene shaft guard prevents damage to the shock absorber shaft from stones and other debris.
- BUSHINGS - Quality oversized rubber bushings result in excellent longevity.
|
المراجعات
لا توجد مراجعات بعد.