BIOLITE | SOLAR MC4 TO HPP ADAPTER CABLE
8.500 KWD
Looking to pair a BioLite BaseCharge power station with a non-BioLite solar panel? If your panel features an MC4 connector, this adapter is for you. This cord adapts your panel to HPP compatibility, making it ready to work with BaseCharge.
- Gauge: 16AWG/12AWG
- (1) High Power Pole (HPP) Ouput
- (2) MC4 Connectors (+, -) Input
- Length: 15″ (380 mm)
- Note: check your Solar Panels specs to ensure voltage and wattage output are compatible with BioLite BaseCharge series
Tech Specs
CONNECTOR TYPE
(1) High Power Pole (HPP), Output
(2) MC4 Connectors (+, -), Inputs
GAUGE
16AWG/12AWG
LENGTH
15 in (380 mm)
معلومات إضافية
| الوزن | 0.1 كيلوجرام |
|---|---|
| الأبعاد | 23 × 6 × 4 سنتيميتر |
كن أول من يقيم “BIOLITE | SOLAR MC4 TO HPP ADAPTER CABLE”
Quick Comparison
| BIOLITE | SOLAR MC4 TO HPP ADAPTER CABLE remove | TJM | IBS JUMP START KIT remove | TJM | SOLAR BATTERY CHARGER | 25A remove | ARB | WIRING LOOM V2 remove | ARB | LED Fog Light Kit remove | ARB | LED Bumpers Fog Light Kit remove | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  | ||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||
| Price | 8.500 KWD | 28.000 KWD | 110.000 KWD | 32.000 KWD | 45.000 KWD | 45.000 KWD | ||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||
| Description | Looking to pair a BioLite BaseCharge power station with a non-BioLite solar panel? If your panel features an MC4 connector, this adapter is for you. This cord adapts your panel to HPP compatibility, making it ready to work with BaseCharge.
Tech SpecsCONNECTOR TYPE
(1) High Power Pole (HPP), Output
(2) MC4 Connectors (+, -), Inputs
GAUGE
16AWG/12AWG
LENGTH
15 in (380 mm) | TJM IBS jump start kit when added to the DBM system allows for fast charging through the relay during alternator charges. Remote emergency link start from auxiliary battery is also available. An optional 30 minute or 2 hour manual link can assist with winch operations. | New from TJM comes the intelligent DC/Solar battery charger (DC25A): the toughest and most advanced dual battery management system available on the market today. The TJM DC25A allows you to charge your 12V second/auxiliary deep cycle battery on the go. It is shock, vibration and dust proof, as well as water resistant, making it suitable for both in-vehicle and under-bonnet installation. Able to charge simultaneously from both solar and alternator (9–32V) inputs, DC25A can also function as an MPPT solar controller and features dual charging modes for compatibility with both smart and conventional alternators. Loaded with a host of safeguard features, the easy to install unit includes over/under voltage, anti-sparking, reverse connection and over temperature protection systems to ensure peace of mind. The TJM DC25A sets a new benchmark for DC-DC battery management. FEATURES The DC25A DC-DC charger is purposely designed for charging auxiliary batteries. It includes all the features needed to maintain the auxiliary battery to its optimum condition and to prolong the battery life. SWITCHMODE TECHNOLOGY The DC25A converts your vehicle’s 12VDC/24VDC alternator power to the correct voltage level allowing your batteries to be fully charged, prolonging battery life and reliability. With the latest synchronous switching technology, efficiency of DC25A exceeds 94% at typical full load condition. DUAL INPUT OPERATION Allows two energy sources to power the DC25A simultaneously. Solar input takes precedence if solar and alternator inputs are present. When solar input cannot provide enough energy to the load, the DC25A will draw power from solar and alternator simultaneously. SOLAR MPPT The DC25A utilises sophisticated MPPT (Maximum Power Point Tracking) solar regulator technology. MPPT maximises the power generated from the solar panels to the auxiliary battery. SUPERIOR 3 STAGE CHARGING Using high speed microcontroller and proprietary charging algorithm, the DC25A delivers a sophisticated 3 stage charging process resulting in a faster and more powerful charge, ideal for deep cycle batteries. The first stage, bulk (constant current), charges the battery faster while the second stage, absorption (constant voltage), ensures the battery is thoroughly charged. The final stage, float, maintains the battery at a safe voltage allowing it to be maintained and ready for use indefinitely. MULTI-CHEMISTRY SUPPORT The DC25A supports GEL, AGM, WET and CALCIUM batteries. If the calcium battery mode is selected, periodic equalisation will be provided to the calcium battery for removing acid stratification. IGNITION CONNECTION The DC25A can be wired to the vehicle’s ignition allowing it to operate only when the ignition is turned on. The ignition connection also activates the lower input voltage operation to suit vehicles with smart (variable voltage) alternators. TEMPERATURE COMPENSATION The DC25A is supplied with a 2 metre temperature sensor. The sensor monitors the battery temperature and adjusts (compensates) the charger’s output to prevent overcharging. This is ideal for batteries used in warmer climates or environments. PROTECTIVE FEATURES Spark-Free Protection The DC25A will not start charging the battery (no output) unless the load is securely connected. It prevents the output leads from sparking due to accidental short circuit making the charger safer to use around batteries. Reverse Connection Protection Reverse connection on input and output terminals does not damage the DC25A internal circuit. The DC25A detects reverse connection condition and indicates whether input or output connection is reversed. Over and Under Voltage Protection The charger will automatically shut down if there is an over voltage or under voltage problem. Over Temperature Protection The charger will lower its output current if the temperature of the unit begins to overheat. | With the introduction of the new ARB Intensity LED driving lights and their use of Deutsch waterproof connectors, ARB has developed a new loom based on an existing 3500440 and 3500520 Auxiliary Lighting Loom. The new loom features the same mouse style switch and harness, with Deutsch DT-06 connectors in place of the bullet type connectors used for ARB fog lights and IPF lights.
FEATURES
| Optional fog light installation kit for vehicles with OE Factory Fog Lights. Different part numbers required to install the optional foglight kit for vehicles that did not come with OE Fog Lamps. See vehicle application guide for details.
| |||||||||||||||||||||
| Content |
| |||||||||||||||||||||||||
| Weight | 0.1 كيلوجرام | غير محدد | 1.5 كيلوجرام | 1 كيلوجرام | 1 كيلوجرام | 2 كيلوجرام | ||||||||||||||||||||
| Dimensions | 23 × 6 × 4 سنتيميتر | غير محدد | 26 × 21 × 7 سنتيميتر | 26 × 10 × 8 سنتيميتر | 30 × 16 × 16 سنتيميتر | 25 × 16 × 14 سنتيميتر | ||||||||||||||||||||
| Additional information |
|
|
|
|
|
المراجعات
لا توجد مراجعات بعد.