Description | The Pioneer Recovery Track Side Bracket mounts Maxtrax Recovery Equipment at a 75 degree angle to all Rhino-Rack Pioneer systems. The engineering of this product allows you to free up space on the top of your Pioneer system for more adventure accessories. Fits up to 2 recovery track products to your vehicle (up to 4 recovery track products can be accommodated if used together with the Pioneer Maxtrax Support Bracket - Product Code 43197).
Please note below the additional products required to add more than 2 Maxtrax Vehicle Recovery products to your roof system. | The Quick Pitch Load Bar is ideal for anyone to mount any accessory to the load bar. You can mount roof top tents, working lights, brackets, jerry cans or any other object to any side of the load bar. |
The Awning to Front Runner brackets are made from 3mm stainless steel that comes in two different models that can be used for mounting the Weathershade awning to the specific side.
| The Tie Down Strap with Hook is designed to be used with Rhino-Rack Eye Bolt Kits to strap down accessories. The hooks can be used to secure loads to fixtures up to 25mm in diameter or mesh wire. The strap itself is 3m / 118 inches in length. |
Use these with the Pioneer Recovery Track Side Bracket (43159) to attach your Maxtrax Vehicle Recovery products to your Pioneer Platform or Tray.
| Thanks to Rhino-Rack&39;s Awning Extension, owners of the Sunseeker 2.5 and Batwing awning range are able to extend the coverage of their shade out by a further 2m. Simply zip the Awning Extension to the awning and secure it to the ground or use the provided telescopic poles and pegs to open it out, creating more shade.
|
Content |
- Sold in a pair
- Minimal wind noise
- Holds your recovery track products firmly in place
- Fits all Rhino-Rack Pioneer systems
- 320mm in length
- Also compatible with Vortex and Reconn-Deck bars
| It comes manufactured from the best quality extruded aluminum and then powder-coated black for a great finish.
Features
- 2 x 1450mm Load Bars
- Quick Pitch end caps to give the load bar a great finish.
|
Already have a roof rack. Mounting the Quick Pitch Weather shade 20 sec awning to a roof rack is done by mounting the Quick Pitch Awning to Front Runner bracket first to the roof rack and then securing the Weather shade 20 sec awning to the brackets. The QP awning to Front Runner brackets comes in 3 different models, Left Hand Side for mounting the awning to the left-hand side of the vehicle, Right Hand Side when the awning needs to be mounted to the right-hand side of the vehicle and the Awning to Double Cab bracket. The awning to double cab bracket was designed to mount the Quick Pitch Weather shade 20 sec awning to double cab vehicles with a shorter roof rack for extra strength.
| |
- Stainless steel
- Ergonomically designed tightening knob
|
- Everything you need is included: telescopic poles, ropes, pegs and a travel bag for your added convenience.
- The Awning Extension is made from the same top notch rip-stop polycotton canvas that is used for all our awning products.
- This extension is not only UV-protected but also waterproof, mould resistant and rust proof.
- All telescopic poles, ropes and pegs are included along with a storage bag.
- Quick & Easy to attach
- UV Protected
- Waterproof (Rating:1500mm)
- MouldShield
- Rust Proof
- Suitable with the Sunseeker and Batwing Awnings
- Additional 4m2 (43ft2) of coverage
- Fits Awning Type: Sunseeker 2.5m (32133)
- Dimensions: Width - 2500 mm / Length - 2000 mm
|
Additional information |
الوزن |
2.5 كيلوجرام |
الأبعاد |
36 × 17 × 14 سنتيميتر |
|
الوزن |
8.5 كيلوجرام |
الأبعاد |
165 × 11 × 11 سنتيميتر |
|
الوزن |
1.7 كيلوجرام |
الأبعاد |
26 × 26 × 17 سنتيميتر |
|
الوزن |
0.8 كيلوجرام |
الأبعاد |
35 × 16 × 8 سنتيميتر |
|
الوزن |
0.75 كيلوجرام |
الأبعاد |
20 × 15 × 6 سنتيميتر |
|
الوزن |
12.9 كيلوجرام |
الأبعاد |
126 × 11 × 11 سنتيميتر |
|
المراجعات
لا توجد مراجعات بعد.