ARB | NITROCHARGER SPORT KIT | LC76 FRONT BUMPER – REAR MEDIUM
ARB | NITROCHARGER SPORT KIT | LC76 FRONT BUMPER - REAR MEDIUM

ARB | NITROCHARGER SPORT KIT | LC76 FRONT BUMPER – REAR MEDIUM

625.000 KWD

Out Of stock

1 × ARB | Front Coil 40mm | 2007-2024 LC71/LC76/LC78/LC79
2 × ARB | FRONT SHOCK NITRO CHARGER SPORT | LC 71 76 79
2 × ARB | Rear Shock Nitro Charges Sport | 45-50mm | LC71/76/78/79
2 × ARB | LEAF SPRING MEDIUM | LC 76
2 × ARB | Spring Bush Kit | LC71/76/79
1 × ARB | Greasable Shackle Kit | 2007-2024 LC76/LC78
1 × ARB | Greasable Fixed End Pin Kit | 2007-2024 LC71/LC76/LC78/LC79
4 × ARB | Leaf Springs U Bolt Kit | 2007-2024 LC76

Notify me when back in stock

The Nitrocharger Sport range utilizes significant advances in key componentry and the latest in valving technology to provide tremendous improvements in ride, comfort and handling over all terrains.

Vehicle specific valving ensures the proper valving is matched to your spring selection, accessory fitment and load carrying requirements, meaning there’s a Nitrocharger Sport Shock Absorber to suit your needs, no matter what the terrain or intended vehicle use.

Nitrocharger Sport Shock Absorbers offer the most cohesive, balanced and finely tuned valving system on the market.

 

FEATURES

    • FRONT Estimated Lift: 40-50mm
    • MULTI-DISC COMPRESSION VALVING – Six valving discs allow greater valving options for the maximum ride and handling performance.
    • HEAVY GAUGE RESERVE TUBE – Heavy gauge (1.6mm) steel reserve tube is 23% more effective than common 1.3mm wall tubing to protect internal components from stone damage.
    • HIGH-QUALITY OIL – Petroleum-based, high-performance formula designed to resist fade and aeration for improved durability and shock absorber performance.
    • DUAL-STACK DEFLECTIVE DISC TECHNOLOGY – Durable rebound and compression multi-deflective disc stacking on either side of the free flowing piston allows infinite tuning options.
    • NITROGEN GAS Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance.
    • MULTI-DISC COMPRESSION VALVING – Six valving discs allow greater valving options for the maximum ride and handling performance.
    • ROD GUIDE – Large, low friction Teflon impregnated bronze bushing for long-lasting durability.
    • TRIPLE LIP OIL SEAL – Large, durable seal incorporates a gas retention check valve design to virtually eliminate contaminant damage while providing outstanding gas and oil retention.
    • PISTON ROD – Super strong 18mm induction hardened chrome piston rod is engineered to handle rigours of heavy loads and tough 4×4 touring.
    • DIRT SHIELD – Impact resistant, polyamide dirt shield provides additional protection from stone chips and off-road debris.
    • VEHICLE SPECIFIC BUSHINGS – High-quality, vehicle-specific bushing manufactured from polyurethane and rubber materials for extended life.

 

 

التصنيف: Brand: ARB

المراجعات

لا توجد مراجعات بعد.

كن أول من يقيم “ARB | NITROCHARGER SPORT KIT | LC76 FRONT BUMPER – REAR MEDIUM”

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *

Quick Comparison

ARB | NITROCHARGER SPORT KIT | LC76 FRONT BUMPER - REAR MEDIUM removeTOTAL CHAOS | UCA | FJ 2007+/HILUX 2005+/PRADO 120 150/TACOMA 2005+ removeTERAFLEX | 1" REAR SPACER EACH | JK 2007-2017 removeDEAVER | 3" LIFT REAR OFF ROAD SPRINGS | CHEVY/GMC-1500 1999-2018 removeARB | NITROCHARGER SPORT KIT | LC78/LC79 FRONT MEDIUM - REAR MEDIUM removeTOTAL CHAOS | UCA | LC200 2008-2021 remove
Image
Rating
Price625.000 KWD310.000 KWD18.000 KWD485.000 KWD655.000 KWD335.000 KWD
Add to cart

Read more

قراءة المزيد

قراءة المزيد

إضافة إلى السلة

Read more

إضافة إلى السلة

DescriptionThe Nitrocharger Sport range utilizes significant advances in key componentry and the latest in valving technology to provide tremendous improvements in ride, comfort and handling over all terrains. Vehicle specific valving ensures the proper valving is matched to your spring selection, accessory fitment and load carrying requirements, meaning there’s a Nitrocharger Sport Shock Absorber to suit your needs, no matter what the terrain or intended vehicle use. Nitrocharger Sport Shock Absorbers offer the most cohesive, balanced and finely tuned valving system on the market.   FEATURES
    • FRONT Estimated Lift: 40-50mm
    • MULTI-DISC COMPRESSION VALVING – Six valving discs allow greater valving options for the maximum ride and handling performance.
    • HEAVY GAUGE RESERVE TUBE – Heavy gauge (1.6mm) steel reserve tube is 23% more effective than common 1.3mm wall tubing to protect internal components from stone damage.
    • HIGH-QUALITY OIL – Petroleum-based, high-performance formula designed to resist fade and aeration for improved durability and shock absorber performance.
    • DUAL-STACK DEFLECTIVE DISC TECHNOLOGY – Durable rebound and compression multi-deflective disc stacking on either side of the free flowing piston allows infinite tuning options.
    • NITROGEN GAS Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance.
    • MULTI-DISC COMPRESSION VALVING – Six valving discs allow greater valving options for the maximum ride and handling performance.
    • ROD GUIDE – Large, low friction Teflon impregnated bronze bushing for long-lasting durability.
    • TRIPLE LIP OIL SEAL – Large, durable seal incorporates a gas retention check valve design to virtually eliminate contaminant damage while providing outstanding gas and oil retention.
    • PISTON ROD – Super strong 18mm induction hardened chrome piston rod is engineered to handle rigours of heavy loads and tough 4×4 touring.
    • DIRT SHIELD – Impact resistant, polyamide dirt shield provides additional protection from stone chips and off-road debris.
    • VEHICLE SPECIFIC BUSHINGS – High-quality, vehicle-specific bushing manufactured from polyurethane and rubber materials for extended life.
   
  • 4130 chromoly tubular upper control arms are 100% bolt on and hand crafted in the U.S.A.
  • CNC machined slug adapters press into the spindle and convert the factory ball joint to a 1" uniball for added component strength & maximum wheel travel.
  • TOTAL CHAOS includes 1" I.D. uniballs that feature a heat treated stainless steel ball & heat treated stainless steel race for maximum corrosion resistance and component longevity. These uniball's also features a military grade PTFE woven fabric liner that helps prevent noise.
  • Custom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel. The lower hi-misalignment spacer registers into the slug adapter for maximum strength.
  • Upper control arms combined with extended length coil over shocks will allow for up to 1" of additional wheel travel.
  • Urethane bushings reduce bushing deflection compared to stock rubber bushings.
  • Control arm pivots include zerk fittings to grease the urethane bushings & inner sleeves without disassembly.
  • 2 stage powder coat process includes a durable clear coat to provide a long lasting finish.
  • Complete grade 8 hardware kit is included.
  • Fits all 6 wheel lug: '05+ Tacoma, '03+ 4Runner, & '07-14 FJ Cruiser, 03+GX470/GX460
Use the TeraFlex JK/JKU 1” Rear Spring Spacer to level out a loaded vehicle. Works on stock or lifted vehicles. This rear spacer also incorporates our industry exclusive spring retainer and guide that helps realign the spring to its proper location during extreme articulation to prevent the spring from dropping out.

 

FEATURES

    • LIFT HEIGHT: 1”

COMPATIBLE

    • JK Wrangler (2-door)
    • JKU Wrangler Unlimited (4-door)

NOTE

    • Sold individually.
Deaver Progressive Series springs are high quality 9-leaf and 10-leaf units fabricated with high grade 5160 “American Made” steel. A higher leaf count spring allows the use of thinner leaf material that yields a more flexible progressive leaf stack, or pyramid, producing a much smoother spring rate curve throughout the complete suspension cycle. The even, linear compression rate curve of our progressive system spring is the primary key to excellent ride quality. Other designs features include full military-wrapped spring eyes for superior durability, diamond cut inner leaf ends minimizing shear points and anti-friction pads inserted between the leafs for a smoother ride and quiet operation. Combined with properly valved shock absorbents, the ride is enhanced beyond belief.

FEATURES

    • 13 leafs, rebound wrap, military wrap, diamond cut ends, anti-friction pads and four-piece bolt through retaining clips. Designed for off-road performance.
    • Comes in pair.
    • Suitable for 2wd and 4wd

KIT INCLUDES

    • Bushing Kit
    • Ubolt Kit
 		The Nitrocharger Sport range utilizes significant advances in key componentry and the latest in valving technology to provide tremendous improvements in ride, comfort and handling over all terrains. Vehicle specific valving ensures the proper valving is matched to your spring selection, accessory fitment and load carrying requirements, meaning there’s a Nitrocharger Sport Shock Absorber to suit your needs, no matter what the terrain or intended vehicle use. Nitrocharger Sport Shock Absorbers offer the most cohesive, balanced and finely tuned valving system on the market.

FEATURES

    • Estimated Lift: 40-50mm
    • MULTI-DISC COMPRESSION VALVING - Six valving discs allow greater valving options for the maximum ride and handling performance.
    • HEAVY GAUGE RESERVE TUBE - Heavy gauge (1.6mm) steel reserve tube is 23% more effective than common 1.3mm wall tubing to protect internal components from stone damage.
    • HIGH-QUALITY OIL - Petroleum-based, high-performance formula designed to resist fade and aeration for improved durability and shock absorber performance.
    • DUAL-STACK DEFLECTIVE DISC TECHNOLOGY - Durable rebound and compression multi-deflective disc stacking on either side of the free-flowing piston allows infinite tuning options.
    • NITROGEN GAS Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance.
    • MULTI-DISC COMPRESSION VALVING - Six valving discs allow greater valving options for maximum ride and handling performance.
    • ROD GUIDE - Large, low friction Teflon impregnated bronze bushing for long lasting durability.
    • TRIPLE LIP OIL SEAL - Large, durable seal incorporates a gas retention check valve design to virtually eliminate contaminant damage while providing outstanding gas and oil retention.
    • PISTON ROD - Super strong 18mm induction hardened chrome piston rod is engineered to handle rigours of heavy loads and tough 4x4 touring.
    • DIRT SHIELD - Impact resistant, polyamide dirt shield provides additional protection from stone chips and off-road debris.
    • VEHICLE SPECIFIC BUSHINGS - High-quality, vehicle specific bushing manufactured from polyurethane and rubber materials for extended life.
   		87504 - Total Chaos Uniball Upper Control Arms -2008+ 200 Series Land Cruiser 
  • 4130 chromoly tubular upper control arms are 100% bolt on and hand crafted in the U.S.A.
  • UCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2-3" lift kits are installed.
  • CNC machined tapered spindle adapters convert the factory ball joint to a 1" uniball for added component strength & maximum wheel travel.
  • TOTAL CHAOS includes 1" I.D. uniballs that feature a heat treated stainless steel ball & heat treated stainless steel race for maximum corrosion resistance and component longevity. These uniball's also features a military grade PTFE woven fabric liner that helps prevent noise.
  • Custom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.
  • Upper control arms combined with extended length coil over shocks will allow for up to 2" of additional wheel travel.
  • Urethane bushings reduce bushing deflection compared to stock rubber bushings.
  • Control arm pivots include zerk fittings to grease the urethane bushings & inner sleeves without disassembly.
  • 2 stage powder coat process includes a durable clear coat to provide a long lasting finish.
Content
Weightغير محدد10 كيلوجرام0.95 كيلوجرام103 كيلوجرامغير محدد10 كيلوجرام
Dimensionsغير محدد32 × 17 × 31 سنتيميتر23 × 18 × 18 سنتيميتر164 × 42 × 15 سنتيميترغير محدد32 × 17 × 31 سنتيميتر
Additional information
الوزن 10 كيلوجرام
الأبعاد 32 × 17 × 31 سنتيميتر
الوزن 0.95 كيلوجرام
الأبعاد 23 × 18 × 18 سنتيميتر
الوزن 103 كيلوجرام
الأبعاد 164 × 42 × 15 سنتيميتر
الوزن 10 كيلوجرام
الأبعاد 32 × 17 × 31 سنتيميتر