| Description |
- Reinforces weak factory alignment cam tab plates that bend during bottom outs or hard front impacts.
- CNC laser cut 1/8" 4130 chromoly replacement cam plates weld-to the frame.
- 1/4" thick lower alignment cam tabs will not bend like factory tabs.
- Welding and grinding are required for installation.
| The Nitrocharger Sport range utilizes significant advances in key componentry and the latest in valving technology to provide tremendous improvements in ride, comfort and handling over all terrains.
Vehicle specific valving ensures the proper valving is matched to your spring selection, accessory fitment and load carrying requirements, meaning there’s a Nitrocharger Sport Shock Absorber to suit your needs, no matter what the terrain or intended vehicle use.
Nitrocharger Sport Shock Absorbers offer the most cohesive, balanced and finely tuned valving system on the market.
FEATURES
-
- Estimated Lift: 40-50mm
- MULTI-DISC COMPRESSION VALVING - Six valving discs allow greater valving options for the maximum ride and handling performance.
- HEAVY GAUGE RESERVE TUBE - Heavy gauge (1.6mm) steel reserve tube is 23% more effective than common 1.3mm wall tubing to protect internal components from stone damage.
- HIGH-QUALITY OIL - Petroleum-based, high-performance formula designed to resist fade and aeration for improved durability and shock absorber performance.
- DUAL-STACK DEFLECTIVE DISC TECHNOLOGY - Durable rebound and compression multi-deflective disc stacking on either side of the free-flowing piston allows infinite tuning options.
- NITROGEN GAS Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance.
- MULTI-DISC COMPRESSION VALVING - Six valving discs allow greater valving options for the maximum ride and handling performance.
- ROD GUIDE - Large, low friction Teflon impregnated bronze bushing for long-lasting durability.
- TRIPLE LIP OIL SEAL - Large, durable seal incorporates a gas retention check valve design to virtually eliminate contaminant damage while providing outstanding gas and oil retention.
- PISTON ROD - Super strong 18mm induction hardened chrome piston rod is engineered to handle rigours of heavy loads and tough 4x4 touring.
- DIRT SHIELD - Impact resistant, polyamide dirt shield provides additional protection from stone chips and off-road debris.
- VEHICLE SPECIFIC BUSHINGS - High-quality, vehicle-specific bushing manufactured from polyurethane and rubber materials for extended life.
|
- TC upper control arms combined with extended length coil over shocks will allow for up to 1” of additional wheel travel.
- 4130 chromoly tubular upper control arms are 100% bolt on and hand crafted in the U.S.A.
- The uniball cup placement is moved to correct the caster angle that is lost with aftermarket lift kits. Vehicles that have an increased ride height are harder to align. The added caster reduces the darting or wandering in the vehicles steering and helps retain the factory alignment specifications.
- 1" I.D. uniballs feature a heat-treated stainless-steel ball & heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.
- CNC tapered spindle adapters convert the factory ball joint to a 1" uniball for easy installation.
- Custom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.
- Urethane bushings reduce deflection compared to stock rubber bushings.
- Control arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.
- 3 stage powder coat process includes a durable clear coat to provide a long lasting finish.
- Complete grade 8 hardware kit is included.
| | The new BP-51 range of high performance, bypass shock absorbers is the result of an exhaustive development process aimed at delivering the ultimate in both comfort and control. Designed, developed and tested entirely in-house by ARB’s team of Old Man Emu ride engineers, BP-51 shock absorbers are vehicle-specific and utilize existing mounting locations to provide easy installation without the need for additional vehicle modification. Unlike most other adjustable shock absorbers, which provide adjustment for compression only, the BP-51 range allows on-vehicle, independent adjustability of both rebound and compression to offer class-leading ride customisation that can be tailored to an individual vehicle or trip requirements.
FEATURES
-
- Estimated Lift: 40-50mm
- REMOTE RESERVOIR - 6061 grade aluminum remote oil canister allows for increased oil volume, resulting in lower oil temperatures.
- HIGH TEMPERATURE HOSE - Durable Dash 6 high-temperature Teflon hose incorporates high-flow fittings for optimum oil flow.
- TOP HAT - 6061 grade aluminum top hat.
- SPRING ADJUSTMENT - 6061 grade aluminum adjustor allows adjustment of spring preload and ride height.
- X5K COIL - High-quality X5K grade steel coil, for use on coil over models, incorporates application-specific design.
- SPRING SEAT - 6061 grade aluminum spring seat.
- SPHERICAL BEARINGS - Large, Teflon-lined spherical bearings.
- PIGGY BACK CLAMP - Remote reservoir piggy back clamp allows easy connection of the remote oil reservoir to the main shock absorber body.
- SHOCK ABSORBER BODY - 51mm bore, 6061 grade aluminum shock absorber body with type III, hard anodized finish for increased heat dissipation and corrosion resistance.
- ADJUSTOR - External, independent rebound and compression adjustment allows fine tuning of ride comfort and control to suit varying vehicle and trip requirements.
- PISTON SHAFT - Hard chromed, ground piston shaft for the ultimate in strength and durability.
- SHAFT GUARD - Replaceable, impact resistant, high-density polyethylene shaft guard prevents damage to the shock absorber shaft from stones and other debris.
- BUSHINGS - Quality oversized rubber bushings result in excellent longevity.
| BDS steps up the performance and capability of the 2021-2024 Ford F150 trucks with 4-inch suspension lift kits. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.
This kit takes advantage of BDS's tried and true high-clearance design for improved ground clearance, strength, and offroad protection while correcting suspension and steering geometry for great on-road handling characteristics. Up front the kit utilizes high-arched 1/4-inch thick steel crossmembers, multipiece differential relocation brackets and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a comprehensive front suspension lift ready for use and abuse.
In the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along and NX2 Nitro or optional FOX 2.0 Performance Series shocks. |
| Content | | | | | | High Clearance Crossmemebers
BDS maximizes ground clearance with their heavy duty ¼-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection.
Heavy Duty Steering Knuckles
BDS corrects steering geometry at the new taller ride height using a pair of high-strength, CNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility.
Rear Lift Option
3 Inch Block Kit
- Level to tail high appearance
2 Inch Block Kit
Rear Shock Option
NX2 Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
FOX 2.0 Performance Series
- 2-inch Impact extruded aluminum body
- Internal floating piston (IFP) monotube design
- CNC machined 6061-T6 aluminum mounting ends
- Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting clear anodized finish
Features & Benefits
- High clearance crossmembers improve strength and offroad capability
- Heavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility
- Top mounted strut spacers to provide lift and install easily
- Differential skid plate for improved offroad protection
- Rear lift blocks and u-bolts to lift and level the stance
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
Recommended Tires & Wheels
(Trimming may be required)
- 35 x 12.5 with 20 x 8 and 5.5 in. Backspace
- 35 x 12.5 with 20 x 9 and 5.75 in. Backspace
|
المراجعات
لا توجد مراجعات بعد.